Single post lifts: 2.5 Tn Single post C-125 
|Net weight||Current and|
|2,500 kg||600 kg||400/230V - 3PH.|
|3 kW||125 mm||1,990 mm||45"||4 Double|
2.5 Tn Three phase electromechanical asymmetrical single post
An exceptional post with a large base with access ramps and a solid carriage.
Suitable for all types of mechanical, bodywork, paint and maintenance tasks.
Available in three phase and single phase versions.
Ideal for small garages with maximum versatility.
- Posts / SlenderTec
- Exclusive details for single post lifts
- Thermal protection
- ISO 9001 quality certifications and IQNet
- European regulation EN 1493:2010 and the directive 2006/42/EC
- Manufacturer endorsement
Posts / SlenderTec
Our SlenderTec profiles, specially designed and hot-rolled, enable us to build lifts with narrow posts that are more resistant to torsion and flexion than other lifts made with folded sheet metal and similar materials.
The SlenderTec technology makes our posts impossible to deform, always looking like they did on the first day.
MAXIMUM STANDARDISED LOAD IN ANY POSITION
Our lift is designed to withstand the maximum load at any angle of the load or length or extension of the arms.
In addition, our arms have safety systems with threaded rods, that provide greater positioning possibilities under the vehicle, facilitating the placement at the fixing point.
The diameter of our spindle is 45 mm, the largest on the market. This dimension causes less friction and, therefore, less wear of "nut-spindle" assembly.
Our spindles are cold-rolled not cut. This process accredits their higher quality and useful life than those of other manufacturers. The spindles are checked one by one before assembly.
In addition, they are suspended by gravity and do not rest on anything, and are thus perfectly centred.
The carriages are equipped with four high quality steel bearings, reinforced with Nylatron pads for better guidance and less wear than Nylon guides.
Our lifts are designed to be leaders in reliability. For this purpose our R&D+i department seeks maximum simplicity and robustness in its designs, from both electrical and mechanical perspectives.
For CASCOS, technology must aid reliability, developing ingenious designs that reduce the risk of breakdowns, but that also facilitate quick repairs.
The nuts are specially designed to be long-lasting and are manufactured from high quality materials: RG7 bronze and Nylatron.
Thanks to our spindles with the largest diameter on the market (45 mm), the nut suffers less wear and less friction and is therefore more durable and needs less greasing.
Exclusive details for single post lifts
They all come equipped with exclusive details:
- 2 tool trays.
- Rubber guards on posts for opening doors.
- Protection of the spindle that prevents the operator getting dirty by touching the column.
Our electric motors have thermal protection to prevent overheating.
ISO 9001 quality certifications and IQNet
In addition to manufacturing with the highest quality standards ISO 9001 since 1999, our lifts are standardised by the most prestigious certification bodies: Aenor, IQnet, Bureau Veritas and TüV Nord.
European regulation EN 1493:2010 and the directive 2006/42/EC
Our lifts exceed the standardisation requirements in design quality, materials, manufacturing processes, maintenance and optimum, safe and controlled operation of the lift.
Each of our lifts includes an identifier of the valid EC declaration of conformity that states that the product complies with the essential European standards and requirements in health and safety in conjunction with its instruction, revision and recommended maintenance books.